XSYIM01

BOPLA Film

BOPLA heat-shrinkable film

BOPLA tape film

BOPLA metallized film

BOPLA printed composite film
Biodegradable Modified Resin

XSYIM01

XSYEM01

XSYEM02

XSYBM01

XSYBM02

XSYBM03

XSYBM04
PLA Products

Straw Series

Knife, Fork, Spoon Series

Injection Series

Transparent Cup Series

Cup Lid Series

PLA Meal Box Series

Corn Starch Meal Box Series

Tray Series

Film Series

Film Bag Series

Raw Material Series

To learn more information

Please contact us further

XSYIM01

XSYIM01 is an injection-molding grade biodegradable resin, available in two sub-grades: XSYIM01FG (food-grade) and XSYIM01UFG (non-food-grade). The resin particles are milky white, prone to moisture absorption, and odorless. During injection molding, the resin exhibits good flowability, rapid crystallization rate, and certain toughness. It is free from harmful elements such as Pb, Cd, Hg, Cr, PBB, and PBDE, as well as toxic substances like phthalate plasticizers and bisphenol A. The food safety performance of XSYIM01FG meets the relevant requirements of GB4806, while the biodegradability of both sub-grades complies with international authoritative standards such as EN13432 and ASTM D6400.

Main ingredients

PLA，Talc Main component: PLA, Talc

Technical indicators

Mechanical properties (after complete annealing)
Test project	Test standard	Unit	Test results
Tensile strength	ISO 527	MPa	≥30
Elongation at Break	ISO 527	%	≥10

Mechanical properties (after complete annealing)
Test project	Test standard	Unit	Test results
Tensile strength	ISO 527	MPa	≥30
Tensile strength	ISO 527	%	≥10

Other
Test project	Test standard	Unit	Test results
Melt flow index	ISO 1133	g/10min (190℃，2.16KG)	20-30
Density	ISO 1183	g/cm3	1.35-1.45

Condition	Unit	Recommended value
Temperature at the rear of the barrel	℃	130-150
Temperature in the middle of the barrel	℃	180-190
Temperature at the front of the material cylinder	℃	180-190
Die temperature	℃	180-190
Mold temperature	℃	90-110
Crystallization time	s	≧15

Application field

Biodegradable knives, forks, spoons, biodegradable toys, etc
Storage and Packaging

This product is made of fully biodegradable plastic particles and should be stored in a dry, ventilated place, away from light. After unpacking, use it as soon as possible. For particles that are not fully used in a timely manner after unpacking, they should be dried at a temperature of 80 ℃ for 4 hours during the next use.
Related images