Jiangsu Xinsiyi Biomaterials Co., Ltd
Telephone: 0527-80708883
Email: 799593295@qq.com
Address: No. 8 Wulijiang Road, Economic Development Zone, Sihong County, Suqian City, Jiangsu Province
XSYBM04 is a blown-film and extrusion-grade biodegradable resin (food-grade). The resin particles are milky white or light yellow and prone to moisture absorption. The films produced from this resin exhibit good gloss and a certain degree of transparency, with no unpleasant odor and excellent coloring performance. It is free from harmful elements such as Pb, Cd, Hg, Cr, PBB, and PBDE, as well as toxic substances like phthalate plasticizers and bisphenol A. Its food safety performance meets the relevant requirements of GB 4806, and its biodegradability complies with international authoritative standards, including EN13432 and ASTM D6400.
PLA, PBAT Main component: PLA, PBAT
|
Particle physical property indicators |
|||
|
Test project |
Test standard |
Unit |
Test results |
|
Melt index |
ISO1133 |
g/10min（190℃，2.16kg） |
≦5 |
|
Density |
ISO1183 |
g/cm3 |
1.25~1.28 |
|
Tensile strength |
ISO527 |
MPa |
≧20 |
|
Elongation at break |
ISO527 |
% |
≧500 |
|
Blown film forming conditions |
Unit |
Suggested value |
|
The temperature at the rear of the barrel |
℃ |
120-130 |
|
The temperature in the middle of the barrel |
℃ |
145-155 |
|
The temperature at the front of the barrel |
℃ |
145-155 |
|
Three-way temperature |
℃ |
145-155 |
|
Die head temperature |
℃ |
145-155 |
|
Performance indicators of blow-molded film (film thickness approximately 20 microns |
||||
|
Test project |
Test standard |
Unit |
Test results |
|
|
Tensile strength |
Horizontal |
ISO527 |
MPa |
≧20 |
|
|
Longitudinal |
ISO527 |
MPa |
≧25 |
|
Elongation at break |
Horizontal |
ISO527 |
% |
≧700 |
|
|
Longitudinal |
ISO527 |
% |
≧300 |
|
Right-angle tear strength |
ISO527 |
kN/m |
≧160 |
|
|
Heat sealing strength |
ISO527 |
N/15mm |
≧10 |
|
Biodegradable self-sealing bags, biodegradable bone strips
This product is made of fully biodegradable plastic particles. It should be stored in a dry and well-ventilated place, away from light, and used as soon as possible after opening the package. For particles that have not been fully used up after unpacking, they should be dried for the next use. The drying temperature should be 80℃ and the drying time should be 4 hours.
Telephone: 0527-80708883
Email: 799593295@qq.com
Address: No. 8 Wulijiang Road, Economic Development Zone, Sihong County, Suqian City, Jiangsu Province
Jiangsu Xinsiyi Biomaterials Co., Ltd 苏ICP备2025185224号
